I have a number in 8.8 notation that I wish to convert to a float.......
8.8 notation is a 16 bit fixed notation, so:
0xFF11 is the number 255.17
0x0104 is the number 1.4
0x2356 is the number 35.86
and so on....
Any ideas on how to convert this into a float?
John 14 10279
On Wed, 1 Oct 2003, John T. wrote: I have a number in 8.8 notation that I wish to convert to a float....... 8.8 notation is a 16 bit fixed notation, so: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86 and so on.... Any ideas on how to convert this into a float?
First of all, you *do* realize that your "8.8 notation"
as specified is not a onetoone function, right? For
example, if 0x0104 is equal to 1.4, then so is 0x008C.
But here you go, as requested...
/* the original number */
unsigned int eight_eight = 0x0104;
/* extract the fields */
unsigned int int_part = eight_eight >> 8;
unsigned int frac_part = eight_eight & 0xFF;
/* put it back together rightways */
double result = int_part + frac_part/100.0;
(Or in a function:)
double from_88(unsigned int val)
{
/* no errorchecking on range of 'val' */
return (val>>8) + (val & 0xFF)/100.;
}
unsigned int to_88(double val)
{
/* no errorchecking on range of 'val' */
unsigned int ival = (unsigned int) val;
unsigned int fval = (unsigned int) (100*(valival) + 0.5);
return (ival << 8) + fval;
}
HTH,
Arthur
On Wed, 1 Oct 2003, Arthur J. O'Dwyer wrote: On Wed, 1 Oct 2003, John T. wrote: I have a number in 8.8 notation that I wish to convert to a float....... 8.8 notation is a 16 bit fixed notation, so: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86
First of all, you *do* realize that your "8.8 notation" as specified is not a onetoone function, right? For example, if 0x0104 is equal to 1.4, then so is 0x008C.
Wait a minute... I realized as soon as I sent that message
that I can't think of *any* reasonable way to get 0x0104
from the floatingpoint value 1.4! If 0x0104 is 1.4, then
what's 1.04? And what does 0x0140 represent in your
notation?
If you really didn't make a typo there, this could be
a *really* interesting format...
My solution assumes you meant 0x140 <==> 1.4, BTW.
Arthur
"John T." <jo**@dat.com> wrote: I have a number in 8.8 notation that I wish to convert to a float....... 8.8 notation is a 16 bit fixed notation, so: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86 and so on.... Any ideas on how to convert this into a float?
Yes: by hand. C has no function for this, since fixedpoint types are
not part of C. However, it wouldn't be hard to write one yourself.
Hints: %, /, 0x100 and/or 0xFF, (float), +.
Richard
On Wed, 1 Oct 2003 08:03:12 +0200
"John T." <jo**@dat.com> wrote: I have a number in 8.8 notation that I wish to convert to a float....... 8.8 notation is a 16 bit fixed notation, so: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86 and so on.... Any ideas on how to convert this into a float?
So what is your question about C? All I see is a question about
algorithms which belongs else where, such as comp.programming possibly.
However, to get you started...
First check your specification. I would expect 0x0104 to be 1.015625
(this is the type of fixed point notation I've always found).
If I am right you just have to do floating point division by 256. If you
are write you have to do some masking to seperate the two octets, scale
them then add them together.
Post here when you have attempted to write the C code and hit problems.

Mark Gordon
Paid to be a Geek & a Senior Software Developer
Although my email address says spamtrap, it is real and I read it.
"John T." <jo**@dat.com> writes: I have a number in 8.8 notation that I wish to convert to a float....... 8.8 notation is a 16 bit fixed notation, so: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86 and so on.... Any ideas on how to convert this into a float?
Not without a better specification of your notation.
I'd normally expect a 16bit fixedpoint notation to have the
highorder 8 bits represent the integer part and the loworder 8 bits
represent the fractional part, with 0x0001 representing 1.0/256.0,
0x00FF representing 255.0/256.0, etc. In that case, you'd simply
multiply by 256.0.
Or you could have the loworder 8 bits represent a multiple of 0.01
(decimal) rather than of 1.0/256.0; in that case, you'd have to
extract the highorder and loworder parts and do a little arithmetic.
In such a notation, though, 0x0104 would be 1.04, not 1.4; was that
just a typo? Such a notation is a bit inefficient, since you're using
8 bits to represent any of 100 values rather than 256 values. If
that's what you're dealing with, though, it's merely odd, not wrong.
Keep in mind that some fractional values, such as 0.1, cannot be
represented exactly in binary floatingpoint. Note also that your
format has no way of representing negative numbers.

Keith Thompson (The_Other_Keith) ks*@cts.com <http://www.ghoti.net/~kst>
San Diego Supercomputer Center <*> <http://www.sdsc.edu/~kst>
Schroedinger does Shakespeare: "To be *and* not to be"
John T. wrote: I have a number in 8.8 notation that I wish to convert to a float....... 8.8 notation is a 16 bit fixed notation, so: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86 and so on.... Any ideas on how to convert this into a float?
Divide the unsigned short value by 256.0
If you don't like the resulting decimal fraction,
then explain it better.
0xff11 is 255.066406
0x104 is 1.015625
0x2356 is 35.335938
0xffff is 255.996094

pete
Keith Thompson wrote: Or you could have the loworder 8 bits represent a multiple of 0.01 (decimal) rather than of 1.0/256.0; in that case, you'd have to extract the highorder and loworder parts and do a little arithmetic. In such a notation, though, 0x0104 would be 1.04, not 1.4; was that just a typo? Such a notation is a bit inefficient, since you're using 8 bits to represent any of 100 values rather than 256 values. If that's what you're dealing with, though, it's merely odd, not wrong.
Keep in mind that some fractional values, such as 0.1, cannot be represented exactly in binary floatingpoint. Note also that your format has no way of representing negative numbers.
In the latter case (the innefficient approach) the "unused" bit can be used
to denote the sign. Just to make things even weirder :)
0x0140 = 1.40
0x01C0 = 1.40
But given the amount of contraints he as already put on his range, I think
the fact that it will be able to hold a sign is apparently out of the
question. :)

Martijn http://www.sereneconcepts.nl
Arthur J. O'Dwyer <aj*@nospam.andrew.cmu.edu> spoke thus: Wait a minute... I realized as soon as I sent that message that I can't think of *any* reasonable way to get 0x0104 from the floatingpoint value 1.4! If 0x0104 is 1.4, then what's 1.04? And what does 0x0140 represent in your notation?
If I'm not mistaken, 0x0140 is 1.64 in his notation.

Christopher BensonManica  Jumonji giri, for honour.
ataru(at)cyberspace.org 
Christopher BensonManica <at***@nospam.cyberspace.org> scribbled the following: Arthur J. O'Dwyer <aj*@nospam.andrew.cmu.edu> spoke thus: Wait a minute... I realized as soon as I sent that message that I can't think of *any* reasonable way to get 0x0104 from the floatingpoint value 1.4! If 0x0104 is 1.4, then what's 1.04? And what does 0x0140 represent in your notation?
If I'm not mistaken, 0x0140 is 1.64 in his notation.
This would make 0x0101 and 0x010A the same thing, yesno? And there
would be no way to represent 1.01, yesno?
Either his "." means a different thing than the fraction separator in
decimal, he has made a few typos, or he doesn't understand his own
function.

/ Joona Palaste (pa*****@cc.helsinki.fi) \
 Kingpriest of "The Flying Lemon Tree" G++ FR FW+ M #108 D+ ADA N+++
 http://www.helsinki.fi/~palaste W++ B OP+ 
\ Finland rules! /
"All that flower power is no match for my glower power!"
 Montgomery Burns
On Wed, 1 Oct 2003, John T. wrote: I have a number in 8.8 notation that I wish to convert to a float....... 8.8 notation is a 16 bit fixed notation, so: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86 and so on.... Any ideas on how to convert this into a float?
Your examples don't tell me how I deal with numbers like:
0x0064
Is this 0.100 or is this 1.00?
Obviously, the first step is seperating the number into the whole number
and the fraction:
/* let n be the number we are dealing with */
float result;
int whole = (n >> 8) & 0xff;
int fraction = n & 0xff;
If the first method is the desired result you would need:
if(fraction > 99)
result = whole + fraction/100.0;
else
result = whole + fraction/10.0;
If the second method is the desired result you would need:
result = whole + fraction/10.0;

Send email to: darrell at cs dot toronto dot edu
Don't send email to vi************@whitehouse.gov
Joona I Palaste <pa*****@cc.helsinki.fi> spoke thus: This would make 0x0101 and 0x010A the same thing, yesno?
Hm, yes, if he's trying to convert these to floats.
And there would be no way to represent 1.01, yesno?
Again, yes, although I'm not sure he wants to. The format itself makes sense
(although I don't know what one would use it for).
Either his "." means a different thing than the fraction separator in decimal, he has made a few typos, or he doesn't understand his own function.
I'm betting on the first one, but I'm not sure...

Christopher BensonManica  Jumonji giri, for honour.
ataru(at)cyberspace.org 
Christopher BensonManica wrote: Joona I Palaste <pa*****@cc.helsinki.fi> spoke thus:
This would make 0x0101 and 0x010A the same thing, yesno?
Hm, yes, if he's trying to convert these to floats.
And there would be no way to represent 1.01, yesno?
Again, yes, although I'm not sure he wants to. The format itself makes sense (although I don't know what one would use it for).
The format is kind of lame IMO. Why not use 0x[09AZ]{2}[09]{2} to
represent 000.00 to 255.99? This is only slightly less efficient, but
much more straightforward.
/david

Andre, a simple peasant, had only one thing on his mind as he crept
along the East wall: 'Andre, creep... Andre, creep... Andre, creep.'
 unknown
David Rubin <bo***********@nomail.com> scribbled the following: Christopher BensonManica wrote: Joona I Palaste <pa*****@cc.helsinki.fi> spoke thus: > This would make 0x0101 and 0x010A the same thing, yesno? Hm, yes, if he's trying to convert these to floats.
> And there > would be no way to represent 1.01, yesno?
Again, yes, although I'm not sure he wants to. The format itself makes sense (although I don't know what one would use it for).
The format is kind of lame IMO. Why not use 0x[09AZ]{2}[09]{2} to represent 000.00 to 255.99? This is only slightly less efficient, but much more straightforward.
Because (10+26) squared is 1296, not 256?

/ Joona Palaste (pa*****@cc.helsinki.fi) \
 Kingpriest of "The Flying Lemon Tree" G++ FR FW+ M #108 D+ ADA N+++
 http://www.helsinki.fi/~palaste W++ B OP+ 
\ Finland rules! /
"A computer program does what you tell it to do, not what you want it to do."
 Anon
Joona I Palaste <pa*****@cc.helsinki.fi> writes: Christopher BensonManica <at***@nospam.cyberspace.org> scribbled the following: Arthur J. O'Dwyer <aj*@nospam.andrew.cmu.edu> spoke thus: Wait a minute... I realized as soon as I sent that message that I can't think of *any* reasonable way to get 0x0104 from the floatingpoint value 1.4! If 0x0104 is 1.4, then what's 1.04? And what does 0x0140 represent in your notation? If I'm not mistaken, 0x0140 is 1.64 in his notation.
Either his "." means a different thing than the fraction separator in decimal, he has made a few typos, or he doesn't understand his own function.
The OP wrote: 0xFF11 is the number 255.17 0x0104 is the number 1.4 0x2356 is the number 35.86
Assuming that 1.4 was a typo, and it should be 1.04, the notation
looks odd but consistent. The highorder 8 bits are the integer part;
the loworder 8 bits are the fractional part multiplied by 100.0
decimal. One advantage of such a notation is that it can represent
decimal fractions such as 0.1 or 0.01 exactly; of course, converting
to binary floatingpoint loses that property.
This would make 0x0101 and 0x010A the same thing, yesno? And there would be no way to represent 1.01, yesno?
Nononono. 0x0101 is 1.01, and 0x010A is 1.10.
It would mean that 0x0164 and 0x0200 would both represent 2.00, but
presumably 0x0164 would be the canonical normalized representation.
I suggest we wait for the OP to come back and tell us what he really
meant.

Keith Thompson (The_Other_Keith) ks*@cts.com <http://www.ghoti.net/~kst>
San Diego Supercomputer Center <*> <http://www.sdsc.edu/~kst>
Schroedinger does Shakespeare: "To be *and* not to be" This discussion thread is closed Replies have been disabled for this discussion. Similar topics
6 posts
views
Thread by jova 
last post: by

3 posts
views
Thread by Robert Mark Bram 
last post: by

6 posts
views
Thread by S. 
last post: by

17 posts
views
Thread by Thomas Lorenz 
last post: by

4 posts
views
Thread by Matthias 
last post: by

2 posts
views
Thread by funcSter 
last post: by

19 posts
views
Thread by 
last post: by

66 posts
views
Thread by CMM 
last post: by

22 posts
views
Thread by bearophileHUGS 
last post: by
          